Let’s get straight. Vast and luxurious closets and wardrobes are not for everyone. As a result, the smaller your wardrobe is, the more challenging it is to stay methodical.
Raise your hand if your closet has an inadequate area to park. Same here. But, no worries, check these 12 built-in wardrobe ideas (for tiny and narrow bedrooms) to deliver ingeniousness for your
little space.
As always, follow the Simphome link inside the description to get more details and relevant information you can only find on the website.
12 Built-in Wardrobe Video:
How to build a new built-in wardrobe?
It would be simple and easy to build a new built-in wardrobe. To do this, you would need some wood and then nails. You would first need to plan the building of the wardrobe using your measurements. You will use screws for attachment points to fasten them into place. In addition, you will need drywall for supports and straight boards that you will use for interior and exterior walls, depending on design specifications.
Other considerations you should take before taking action such as:
No 1. Measure the space for the closet.
No 2. Measure your height.
No 3. Measure the size of your bedroom.
You will need to know these things to build a new home built-in wardrobe easily, and you will also have all the correct dimensions for an ideal built-in wardrobe design for your bedroom.
How many built-in wardrobe units should I have?
Answer: 12.
What is the average size of these units?
Answer: 2.6m x 1.3m.
How many wardrobes can be installed?
Answer: 160, 120 in standard width, and 80 in narrow widths.
Where do I start with a DIY build?
Answer:
- Step 1: Measure the space available for a walk-in wardrobe and determine the unit size required.
- Step 2: Find the space to install your wardrobe, e.g., behind a wall, under a built-in desk, or behind an entertainment unit.
- Step 3: Study your floor plan and locate the stud location to build or special order a bespoke customizable wardrobe system.
- Step 4: Complete the installation of the wardrobe frame, fixing everything securely to the wall (no DIY lovers allowed!).
- Step 5: Install your wardrobe system.
- Step 6: Warranty the wardrobe system for a minimum of 10 years and take it with you to your new home.
Tip 1: Rejoice in your ability to store more stuff in your small space!
Tip 2: Do you have a problem in the future with hanging, folding, and storing clothes? Go for a larger wardrobe. The first one will be sufficient for a few years while you finish the dream.
Lighting and space are important factors to consider when designing your wardrobe.
Tip: Go for a dimmer switch or LED light with motion sensors for each wardrobe zone to catch the dresser with ample lighting from top to bottom.
What is the difference between a duty build and a customs duty build?
Answer: Duty Build: All ready-made systems are available at your local hardware store or online. Custom Duty Build: Only high-end suppliers, e.g., Coronado Cabinetry (NZ), offer it. It considers your taste and preferences to make sure that it suits you.
What size do you need for space for a built-in wardrobe?
Answer: 1.6m x 1.3m.
Do you need to take into account your floor space?
Answer: Yes, it depends on the type of materials used.
What size do you need for space for a built-in wardrobe?
Answer: 60cm x 40cm (height is not a standard measurement as the width varies).
Which are the materials that you can use to build my built-in wardrobes?
For standard width and narrow width, there is no set standard of wood species: pine, cedar, and birch (yes, birch is timber).
How do you build a partition between shelves?
Answer:
Step 1: Cut the board in half with a circular saw and drill a hole through the center to make a spacer.
Step 2: Screw the spacers on both sides of the opening.
Step 3: Measure and cut two pieces of wood to fit each side, then screw these in place.
Step 4: Screw the plywood into place, ensuring it’s flush with both sides of the board.
List Entries:
10 Small Walk-in Wardrobe Layouts
10 Wardrobe Behind Bed Ideas
10 Wardrobe Layout Storage Ideas
10 Built-in Bedroom Wardrobe Ideas
10 Bedroom Wardrobe Renovation ideas
10 Modern Wardrobe Design and Makeover Ideas
10 Bedroom Wardrobe & Cabinet Upcycled ideas
12. The Poppydeyes Bedroom Wardrobe Makeover
Having a fancy wardrobe is merely a dream if your bedroom lacks space. But, it does not mean it is impossible, just like this wardrobe.
The idea is to get your stuff in one spot; thus, you need something extraordinary. Draw diverse layouts previously to get the right plan.
It should contain nearly all of your stuff. It starts with dresses and ends with shoes. It also has a long drawer which fits the clothes aptly. If you decide to put on short outfits, exploit the space below.
Be bold to go for a bit dark hue. As long as you have ensured you have sufficient lighting to kick narrow feeling away. Be patient and cautious because it is worth every penny.
11. The Simple but Cute Built-in wardrobe Idea
What an attractive solution! Instead of throwing all the woods, this wardrobe uses a wall as the background. It saves the material and paint.
It is an excellent example of using floor-to-ceiling design to occupy every inch of the space. See the shelves on the left? It is a removable and instant idea that the author did to acquire more space. With this idea, you can put your rarely used items behind the couch even to hide your secret and confidential documents. Alter the rod based on your need, and you’re all set.
10. The Natural Tint Idea
It is an up-to-date, practical, and handy furniture trick. This wardrobe trick emphasizes minimalist style and ergonomics while embracing natural vibes through the brown hues of wood.
As a result, natural tint comes into play, and applies white is the leading performer. Next, together with eco-friendly fabric for the textile, the wood pattern complements it. To accentuate natural elements, the author employs unique lighting. This combination delivers warmth and a serene ambiance to the room. Under the bed, it has secret and secured storage too. Seamless.
9. The Handle-less Modern Wardrobe Idea
In a minute room, the main principle is going for less decoration and accessories. Look at this handle-less wardrobe, for example. It is a minimalist item at its best.
A modern touch teams up with a well-planned design to stash your clothes, shoes, and accessories. But then, surprisingly, instead of three wood add-ons, it has only two. Nevertheless, they succeed in rubbing out monotonous air effortlessly. A blend of dark grey, white, and harmonious flooring is just an excellent combo for your tired mood.
8. Craft the Corner Wardrobe and Single Wardrobe with Internal Drawers
It is a savvy way to use vacant corners, a point we forget every so often. First, draw a special design for those to fit your cave. Include internal drawers to serve your necessities.
For the corner wardrobe itself, install the legs into each base; check the sides, the back, and the top just in case they need repair. Next, fix the internal with two shelves and hanging space.
Next, deal with the single wardrobe that is a bit diverse setup. It contains an internal drawer and two shelves. The job is to ensure their level and security. Finally, for a more spacious feeling, paint it white.
7. The Small Fitted Wardrobe Idea For Either Side of The Bed
The wardrobes also have small LED lights for reading and power outlets with USB slots.
If you bring a glass of water, that can be a perfect place, including your phone while charging overnight. The wardrobes are custom-made with drawing space, floating shelves, and hanging storage.
Follow the link to get the blueprint and measurement you can adjust with your situation. To get a professional to do it for you would cost an estimated £2230+VAT.
What is your advice for building built-in wardrobes? [Think in advance]
Answer:
If you need to build something out of the way (and therefore more space-efficient), do it at an early stage so you can enjoy your new wardrobe.
Additionally, you need to pay attention to:
- No 1. Clear storage needs to be accessible and easy to use: you should be able to pull a dress out of the wardrobe without any effort.
- No 2. Space in-between storage should not be too large, so remove the shelves if you don’t need them.
- No 3. Use the right tools for a tidy job: Tape measure, pencil, and screwdriver
- No 4. Use your imagination: think about what you want if you don’t need to store too many clothes.
- No 5. Use paint, stain, and paint to change the look of your wardrobe at no additional cost.
- No 6. Go DIY! Create your own custom-made plan for a bespoke wardrobe by yourself
The fundamental principle of building a wardrobe is that it should allow for every possible function and storage need. The larger the unit’s capacity, the more challenging it is to create space-efficient wardrobes with a functional core.
- The base of your wardrobe should be made from plywood (sand it down before installation)
- Keep your drawers organized using different materials for each drawer (e.g., one made of metal and another made of wood), or make your own type using only 2x4s to create 4 small drawers.
- You can have a removable/sliding clothing rack: simply hang it using a tension rod.
- Ensure to put non-perishable items at the bottom of the wardrobe, e.g., shoes and boots.
- Roll out your clothes from the bottom up to ensure that they lie flat.
- Keep your boots, hats, and other objects in baskets or boxes on top of your wardrobe.
Can I make my own doors on my built-in wardrobes?
Answer: Yes, you can create your own doors by following these steps:
• Measure the space above the wardrobe frame and cut a piece of plywood to measure.
• Screw or glue the plywood in place and ensure a small gap between it and the wall for maximum ventilation.
• Put hinges on each side of the door and screw it into position.
• Sand down any rough edges on your door before installing it.
How do I choose a good built-in wardrobe manufacturer?
Answer: They should be able to understand what you need and how they can help you. Be clear about your requirements and discuss their experience in providing similar wardrobes that meet or exceed your expectations.
Can you use hollow core doors for built-in wardrobe storage units?
Answer: Only if you’re building a wardrobe for under 1.2m in height. Use hollow core doors to maximize space in your space-saving wardrobe and take advantage of it while storing clothes.
Do you have a good example where a built-in wardrobe saved the house?
Answer: The owner of a 150 years old cottage decided to build a new and much larger house that she intended to live in with her family. The cottage was built on rocky land, and the builders were not careful when building the foundations, which meant the floors were made of concrete. The floors warped due to the weight of the heavy walls. The only storage space available then was in one of her built-in wardrobes, so after all the hard work, she had saved a lot of money by using it instead.
Is it possible to build an entire room using built-in wardrobes?
Answer: Yes, it is, provided that you don’t need a ceiling or roof (i.e., you don’t have an area with any light fixture!).
What are the benefits of building your own custom closet systems from scratch versus store-bought ones?
Answer: There is an unlimited variety of outcomes when you build your own system. Also, you have the opportunity to add and modify features that would not be available in store-bought closet systems.
What is your advice for installing built-in wardrobes?
Answer: Take great care, measure the space, review the plans, and mark where to place all parts of your wardrobe before building. Also, use JB Weld or similar adhesive to attach everything firmly together.
What materials and tools should I use to build my own custom closet system?
Answer: You will need only a few basic tools and materials:
• Plywood: This is the main material used for most of the built-in wardrobes in my designs.
• 2×4 boards: You can use these to create floating shelves and other parts of the wardrobe system.
• Furniture-grade plywood: You can use this to create moldings to give your wardrobe that professional look.
• Hinges: These are placed on doors and drawers to operate properly, open, and close easily.
• Corner braces: You need these for all corners where you connect 2x4s together adjacent to each other (i.e., into a corner).
• Screws: You need a lot of them to connect the components of your wardrobe, so you recommend buying at least 50 different types.
• Fastenings: It is a good idea to use one of these (nickel or black screws) for every joint between 2x4s and all internal supports.
• Tools: I suggest that you should have at least the following as well as a tape measure, pencil, and screwdriver:
• Drill bit:
• Jigsaw or bar clamp:
• Metal drill bit:
• Injection molding compound for finishing/molding up the handles etc.:
• Saw blades:
• Sandpaper and sanding block.
• Elbow grease.
Did you have any problems with the built-in wardrobe design? If so, how did you resolve it?
Answer: You can’t see a single problem in all my wardrobes. It wasn’t that difficult to make a perfect wardrobe for my home as I have experience with DIY projects and worked off all the plans to get something great.
Can I add doors to a small space under my built-in wardrobes?
Answer: Yes, you can make your own doors by following these instructions:
- Measure the space above the wardrobe frame and cut a piece of plywood.
- Screw or glue the plywood and ensure a small gap between it and the wall for maximum ventilation.
- Hinge on one side of the door.
- Screw or glue the door into position.
- Sand down any rough edges on your door before installing it.
Can I use screw doors to cover my built-in wardrobe?
Answer: Yes, you can use them, but ensure that you attach them perfectly to hang properly.
Do you have any tips for building a DIY closet system?
Answer: Yes,
• Start building from the ceiling and work your way down.
• Pay attention to the alignment of all parts of the system and check that all corners are perfect.
• Use glue or wood screws to attach everything firmly together.
• Use 22 or 24-gauge metal for your drawers (anything higher than this is unnecessary).
• Make sure you use all the right tools to do a perfect job.
• Don’t forget to add all the details like handles and moldings.
• Test everything by opening and closing the doors, drawers, sliding mechanisms, etc.
How do I build a wardrobe system for 120cm wide space?
Answer: First, you need to add a hanging rail that is 90cm wide and is fixed at one end. The fence is 43cm wide and 56cm high. Its thickness depends on the amount of space you have between it and the wall. You can use different types of materials to get the exact look that you would like:
• First, measure your space and mark it onto your shelf boards.
• Then cut out the parts with a jigsaw or sandpaper/sanding block.
• The board should be 45mm thick.
• We recommend you use 12mm plywood for this part of your floor as it gives it a nice finished look. It also makes it very robust.
• You can make a nice and stable shelf by attaching the sides to the ends. Simply screw them on tight, and they will be very strong.
• Finally, secure them along the outer wall by screwing them in tightly.
When building a built-in wardrobe system for my kitchen, how much space do I need to leave above it?
Answer: You don’t need to leave any gap above your wardrobe.
Should I put a ceiling lining on top of my built-in wardrobes?
Answer: You can use a solid plywood piece to cover the area on top of your built-in wardrobes. It will provide an even surface on which to place things and make it easier to install cupboards later.
How can I know if my design idea for a built-in wardrobe in my bedroom is feasible?
Answer: First, measure the width and height of the space you want to use. Check that your design fits into the right place.
If I’m looking for a system, I can use for bathroom storage, which one should I choose?
Answer: You can select closet racks or built-in cabinets to store things like towels, shampoo bottles, and other accessories.
Do you have any additional recommendations about making my own custom closet system?
Answer: Yes, here are our thoughts:
• Always follow the plans provided and build carefully from top to bottom.
• Pay attention to the alignment of all parts of the system and check that all corners are perfect.
• Use glue or wood screws to attach everything firmly together.
• Use 22 or 24-gauge metal for your drawers (anything higher than this is unnecessary).
• Make sure you use all the right tools to do a perfect job. Don’t forget to add all the details like handles and moldings.
Which is better for finishing – molded handles or finished moldings?
Answer: Molded handles are easier to install and are easy to paint.
What are the popular built-in wardrobe ideas and designs for small bedrooms?
Answer: We have seen many brilliant designs for built-in wardrobes in small bedrooms. The most common was the combination of closets into one. Some people used sliding doors with up and down rods, drawers, shelving, closet systems, etc.
How do I plan out my DIY storage units in my closet before building them from scratch?
Answer:
Step 1: Measure the space above the wardrobe frame and cut a piece of plywood.
Step 2: Screw or glue the plywood and ensure a small gap between it and the wall for maximum ventilation.
Step 3: Build up around your shelf boards (there are a lot worse ways than gluing them on)
Step 4: Secure them along the outer wall by screwing them in tightly.
Would you like to add any molding or detailing to your built-in wardrobes?
Answer: Use different moldings to make the walls look clean and smooth. The most popular ones are wainscoting, beadboard, and other types of woodwork.
Can I store tall things inside my built-in wardrobes?
Answer: Yes, you can use tall cabinets or custom shelves. It will be a great idea if you hate putting things on the floor.
Which would you recommend for my space?
Answer: We recommend using 12mm plywood for this part of your floor as it gives it a nice finished look. It also makes it very robust.
How do I know the best size for my closet’s built-in wardrobe?
Answer:
Step 1: Measure the width and height of the space you want to use for your closet.
Step 2: Double-check that your design fits into the right place.
Do you have any recommendations if I want to build a cheap custom closet system?
Answer: Sure
• You can use closet shelves or built-in cabinets instead of a standard system.
• There are many DIY books/videos found in the local library and on the Internet.
• You can purchase a set of plans and read the instructions carefully.
What are some ideas for built-in wardrobes that look great in an apartment?
Answer: One of the best choices would be sliding doors with up and down rods, drawers, shelving, closet systems, etc.
What are some ideas for built-in wardrobes that look great in small bedrooms?
Answer: I have seen great combinations of built-in wardrobes in small bedrooms.
What is the best way to add security features like locks and alarms?
Answer: You can easily add locks and alarms to your wardrobe systems to protect your valuable items.
Which is the best material to use for my DIY closet systems in the bedroom?
Answer: We recommend using 12mm plywood for this part of your floor as it gives it a nice finished look. It also makes it very robust.
Which is better for finishing – molded handles or finished moldings?
Answer: Molded handles are easier to install and are easy to paint.
How can I prevent dust from settling in my system?
Answer: You can simply use a vacuum cleaner with attachments to clean your system and keep it clean all the time.
Will a built-in wardrobe create a more spacious bedroom?
Answer: Yes, your built-in wardrobe will create a more spacious bedroom.
How much does it cost to make my own custom closet system?
Answer: It depends on the size of your system. A small custom closet system can cost around USD 1000.
How can I know if my design idea for built-in wardrobes in my bedroom is feasible?
Answer: First, measure the width and height of the space you want to use. Check that your design fits into the right place.
Do you have any additional recommendations about making my own custom closet system?
Answer: Yes, here are our thoughts:
• Always follow the plans provided and build carefully from top to bottom.
• Pay attention to the alignment of all parts of the system and check that all corners are perfect.
• Use glue or wood screws to attach everything firmly together.
• Use 22 or 24-gauge metal for your drawers (anything higher than this is unnecessary).
• Make sure you use all the right tools to do a perfect job. Don’t forget to add all the details like handles and moldings.
• Always start with the base of your system and check for any airflow problems before you begin.
What additional security measures can I use to protect my custom closet system?
Answer: Here are a few things that you can do to increase your security:
• Install a deadbolt on your bedroom door.
• Use a padlock for added security. You can also use keyed locks or combination locks.
What is the best way to hide wires and cables in my closet?
Answer: You can simply place all of them inside the walls or use a wire management system to hide them behind the walls, doors, etc.
Can you reuse existing furniture to save money on building your own custom closet system?
Answer: You can reuse existing furniture for your custom closet system.
Can I build a custom closet system above a fireplace?
Answer: Yes, you can use anything strong enough to support the weight of the materials inside your wardrobe system.
What additional tips do you have on building my custom closet system?
Answer: These are our thoughts:
- Make sure that you measure everything again and double-check your design before starting to build. Don’t forget to add details like moldings, handles, etc.
- Always ensure that everything is perfectly aligned when you start building your custom closet system. Don’t forget about hinges and doors during the construction process.
- Use the right tools to build your system.
- Always read and follow the plans.
- Don’t forget to reinforce your walls and floors with additional support beams to ensure that everything is strong enough to hold your custom closet system.
How can I easily paint my own custom closet system?
Answer: You can use high-quality spray paint for your wardrobe, but it might require more effort than a brush. Just be patient when applying the spray paint onto the surface of each piece of woodwork.
6. A Small Wardrobe Idea
The following built-in wardrobe comes with a space for a small TV and some drawers for underwear and socks. All those are included in this bespoke wardrobe.
As you can see from the photo and the drawings, the interior of the small wardrobe was made with two small drawers at the bottom for shoes and a large amount of storage space for fluctuant items like long apparel.
There’s space for hangers and shelves in this compact fitted wardrobe too.
Second Idea:
If TV annoys you, this wardrobe idea would be a terrific choice. It is an L-shaped, modern, fitted wardrobe with a touch latch. It is customizable according to your needs, and you’ll get the following features after the project is done:
A door leading to on-floor storage, shelving for rails, and the drawers themselves.
5. Customize your wardrobe door with new sliding like this from Fusteri Amanel
Nothing beats custom designs for most bedrooms when talking about suitability. They follow your room, and with a good plan, they will not let you down.
Take this sliding door, for example; you need almost no space to open it. It saves you acres of place. Other than the door, it has a wide-ranging design inside as well.
The solution features shelves, two hanging rods, and three more than enough drawers to bear various items. In addition, it has a matchless pattern; it opts for a two-tone rather than a single.
4. How to design a walk-in wardrobe
Let’s talk about principles for crafting a new walk-in wardrobe when you have a small chamber. First, observe the big picture you have to work with. One thing, on one occasion, it means you have to deal with windows and doors too.
If you need an extension, start from a walk-in wardrobe layout to determine the doors, openings, and fixtures’ position. Forget about opening doors when the dressing room is a part of the master.
Finally, install plug sockets for electrical accessories to ensure adequate lighting, or you better go for bright color paint.
Other walk-in wardrobe designs you can experiment with such as:
No 1. A walk-in wardrobe design with two, three, or four pieces of built-in shelves.
No 2. A walk-in wardrobe design with a Solid wood furniture unit with built-in shelving.
No 3. A Built-In wardrobe with a built-in bench underneath the stairs for storage.
No 4. A walk-in wardrobe design includes shoe racks for storing shoes.
No 5. A walk-in wardrobe design with a shelf above the door to store small items that might be too small for you to hang in your main wardrobe.
No 6. To organize clothes better, a walk-in wardrobe design with a floating shelving unit within your main wardrobe.
No 7. A walk-in wardrobe design with an extra-large shoe rack outside your closet for shoes that don’t fit into the cabinet takes up to much space.
3. Adopt the Inspiring Idea from Sofia’s Bedroom
In a glimpse, you can tell that this room is chic and charming. Hence you can tell it is a girl’s territory; see the big windows? They are beneficial for minimalist style as they let natural light flow and save energy.
Next, we go to the wardrobe. It has floating shelves as its wings to place accessories, books, and most used items.
To embellish its look, the owner uses simple knobs. Under the bed, you can access hidden storage to keep essential things. As you also can see, the floral pattern states the room. Finally, the owner took the pendant light to get the job done.
2. Take the unique wardrobe idea from the Samara
Tweak the wall of your petite wardrobe to these unique storage solutions people rarely imagine or think about.
This storage solution has unique mechanization that you can replicate for your apparel, including hats, keys, umbrellas, and raincoats. One technique you can learn to imitate the work is “The Piano Shelf Sculptural Wooden Wall idea.” Follow the Simphome link to find more detail.
Lastly, number 1, Embrace the Bespoke Wardrobe Idea from the Lozidesign
Finally, we meet personalized wardrobes to accompany the master bedroom. Adjust the models, colors, and materials to adapt to your needs and challenges.
It comes with multiple and well-arranged storages to hoard different items, including colors that run smoothly from one level to another, complementing each other immensely.
The decorations and other functional elements rely on the cut-out handles and shelves’ doors with different placements. They immediately draw the eyes as the guests open the door. Endearing idea.
In conclusion, a tiny bedroom sparks problems if you are sloppy selecting the right wardrobe. We hope you adore and can adopt some of those handsome ideas for your own personal benefit.
References:
12. Poppydeyes.com
11. Tiktok.com
10. Behance.net
9. Twbespoke.co.uk
8. Realroomdesigns.co.uk
7. Jvcarpentry.com
6. Jvcarpentry.com, Pinterest.co.uk
5. Fusteriamanel.com
4. Myfittedbedroom.com
3. Twbespoke.co.uk
2. Behance.net
1. Lozidesigns.com