13 Small Kitchen DIYs, You’ll Wish You Knew Them Sooner!

3. An Elegant yet Simple spice rack with Wood and Brass.

Building Your Wood and Brass Built-in Spice Rack

Step 1: Building the Wood Box

Cut the plywood to size:

  • Back piece: 16″ x 30-3/4″
  • Side pieces: 30-3/4″ x 2-3/4″
  • Shelves and top/bottom: 14.5″ x 2-3/4″

Attach the sides and top/bottom pieces with glue and finish nails. Then, attach the back piece using glue and finish the nails.

Step 2: Drill Holes for Brass Rods

Decide where you want the posts and mark both sides of one board. Clamp the boards together and drill through several boards at once using a drill bit that accommodates the screws for the brass posts.

Step 3: Insert Shelves

Apply glue to the sides and back of each shelf and slide them into position. Use clamps to hold them in place and nail the sides to secure the shelves. Let the glue dry overnight.

Step 4: Add Veneer to Shelf Fronts

Cut a piece of veneer banding slightly longer than the shelf pieces. Use an iron to press the veneer in place, running the iron along it to activate the glue. Press a block of wood against the veneer to ensure a strong bond. File off the excess veneer and sand the edges lightly.

Step 5: Stain and Finish

Stain and finish the wood according to your preference. Use Rubio Monocoat or any wood stain followed by a clear coat for protection.

Step 6: Insert Shelf into Wall and Cover with MDF

Measure and cut a piece of MDF to cover the side wall. Cut an opening in the MDF to fit the spice rack, ensuring precise measurements. Rough-cut the hole using a jigsaw and then use a router with a bottom-bearing flush-trim bit for a clean cut. Sand and finish the MDF before installing it over the spice rack using finishing nails.

Step 7: Install Brass Rods

Cut the brass bars to length and slide two posts onto each bar. Insert the brass rods into the pre-drilled holes on the shelves.

Step 8: Fill and Label

Fill your spice jars with spices, add labels, and enjoy your finished wood and brass spice rack!

Detailed DIY from

2. A Standing shelf Barn Door Style From Marco Bianchi

Transform your empty wall into an attractive storage solution that defies limitations. Picture the possibilities as you embark on this inspiring journey created by Marco Bianchi. While we don’t have detailed instructions to share, allow your imagination to soar with the image provided and adapt the concept to suit your unique space.

Embrace the challenge of organizing your clutter and begin by carefully measuring your asset or necessary clutter. Gather materials such as wooden planks, 2mm aluminum tubes, dowels, or even budget-friendly steel wire. Consider repurposing sliders from a kitchen cabinet or explore the allure of a barn door style with a hardware kit that aligns with your budget.

Source 1 | 2

1. Dekay’s Craft Woodworking Folding Box Project Idea

Discover the perfect woodworking project that offers versatility and practicality, whether you’re on the go, enjoying the great outdoors, or seeking to declutter your kitchen. This folding box idea is a game-changer! Immerse yourself in the comprehensive video tutorial that will equip you with all the knowledge you need to bring this project to life.

Once you’ve witnessed the magic unfold on screen, you will be captivated by the possibilities. To fully embrace this endeavor, you’ll require wood materials and a modest investment (under $30) in the remarkable GemRed 82305 Digital Angle Finder Protractor.

It’s refreshing to see positive comments about the innovative “upside-down” storage mode and the ingenious use of a belt for easy transportation. Honest critiques remind us that perfection can be sought, with suggestions to address stability, wood sealing, construction techniques, and cleanliness.

While some may yearn for more creativity, let’s appreciate the software-designed precision and CNC-cut workpieces that ensure accuracy and efficiency.

So, are you ready to embark on this woodworking adventure? Unleash your skills, overcome challenges, and witness the satisfaction of creating something practical and functional with your own two hands. Dive into the world of woodworking and unlock your true potential.

Check out: Dekay’s Crafts Channel

Written by Simpson

I am hired to run this website and challenged to make it popular. I have few Youtube Channels too but I am sure you don't want to know that information.