12. A DIY OFFICE DRAWER CABINET
To build this cabinet, you will need to have plywood sheets cut into manageable sizes, a track saw, a pocket hole jig, and pocket screws. Once you have cut all the parts, including two sides, top, bottom, and toe kick cut from 3/4 inch plywood, assemble the cabinet with 1-1/4″ pocket screws. Then, use a groove to fit the bottom panel and assemble the drawers using 1/2-inch plywood.
After that, install the drawer slides and boxes using spacers and screws, and finally, cut and install the drawer fronts using screws. Consider adding plastic file hanger rails for the bottom drawer if you want to use them as a file cabinet.