Simpson
8-7. A DIY Sliding Pantry Shelving Idea from DoorDIY
Creating functional pull-out pantry shelves can be a rewarding but time-consuming project. Here’s a breakdown of the essential steps:
- Prepare the Mounts: Cut and install 2×3 and 1×2 boards on the wall for support. Ensure they are level and securely anchored.
- Install Sliders: Adjust the sliders to account for any unevenness in the pantry. Shim them out as needed for proper alignment.
- Build the Shelves: Measure the distance between the slides and subtract the width of the side boards. Cut the base and sides of each shelf. Use 1x4s for the sides and back and 1x2s for the front. Nail the inner slide piece to each side.
- Sand and Paint: Round off sharp edges and paint the shelves with oil-based enamel for durability.
- Consider Ball-Bearing Sliders: Though lower-end sliders were used, adding white lithium grease improved their performance.
- Utilize Extra Space: If available, create additional shelves above the pull-out shelves to store less frequently used items.
Remember, this project requires precision and problem-solving skills. While it may be labor-intensive, the end result will be worth it. Enjoy your new pantry and the convenience it brings!
A Relevant Idea: DIY Pantry Shelves with Drawers
Transforming your pantry with custom shelves and drawers can be a rewarding project. Here’s a simplified guide:
- Cut Shelves: Use birch plywood to cut five shelves to fit your pantry dimensions, leaving a little leeway for maneuvering.
- Build Supports: Create custom supports using 2×3 and 1×2 boards, ensuring they are securely anchored to wall studs. Counter-sink holes to prevent wood splitting.
- Stain Wood: Apply eco-friendly stain to the shelves and supports. One coat is sufficient for the supports, while the shelves may require multiple coats.
- Install Supports: Attach the supports vertically, maintaining proper spacing. Use a laser level to ensure everything is straight.
- Build Drawers: Construct narrow pull-out drawers using strips of wood joined with adhesive and nails. Attach drawer slides to mounts underneath shelves.
- Mount Shelves: Insert shelves one by one, securing them to the supports with wood screws.
- Add Trim: Cover exposed plywood edges with trim for a polished look. Use construction adhesive and nails to attach the trim.
- Insert Drawers: Place the drawers in their designated spaces, ensuring a proper fit by trimming the trim if needed.
Remember, the pantry closet may have uneven walls, so precise measurements may not always align perfectly. Adapt and adjust as needed. Enjoy your newly organized pantry!
8-7. Doordiy.wordpress.com | Justmeasuringup.com
