Simpson
13. Easy DIY Sliding Closet Rod
Prepare the materials with wood screws, washers, and copper spray paint. Give the visible screws a quick coat of copper spray paint and let them dry.
Next, measure the distance from the back wall to the outside trim of the closet. Use a pipe cutter to cut the copper pipe according to the measurement. Smooth the cut end with a file to remove burrs.
Attach a copper tube cap to the end of the pipe outside the closet, then mount the copper tube straps. Screw the first strap about an inch back from the front edge using copper-painted wood screws.
Install the second strap halfway between the first strap and the back of the closet, ensuring it’s level with the front strap. Slide the copper pipe into the straps. Mount two additional straps between the front and back straps, centered and equally spaced. Add copper-painted washers as spacers under the straps to adjust the pipe’s movement.
If the pipe hits the back wall, add a small hidden screw near the back wall to prevent damage. If the pipe protrudes too much, trim it with a pipe cutter until it fits properly.
Congratulations! You’ve created a custom sliding closet rod in under 30 minutes for less than $15.
The Critiques: While this tutorial provides a budget-friendly and easy-to-follow solution for a sliding closet rod, it’s essential to consider a few things. Firstly, ensure that the closet structure can support the weight of the rod and clothing.
Additionally, using copper spray paint and washers may not be the most durable or aesthetically pleasing solution in the long run. Consider exploring alternative materials and finishes that suit your preferences and durability requirements. Always adapt the instructions to your specific needs and consult a professional if unsure about any step.
Or check the detail first from Chatfieldcourt.com.
