Simpson
Until recently, a gas fireplace was seen as a purely aesthetic choice to serve as a focal point in your living room, leading to expensive and inefficient appliances that look identical to traditional coal fireplaces. Homeowners no longer want to waste money on a heating appliance that sends most of its heat up the chimney or on a fire that consumes so much gas that a draughty air-vent must be installed in the room to comply with modern safety standards due to growing heating costs.
Over the past five years, there has been a major shift in the heating industry. While modern fireplaces still include a lifelike flame, consumers today prioritise energy efficiency above all else when shopping for a new gas appliance. As a result, the vast majority of available models now boast great efficiency and are considered a stand-alone heating option.
There is a gas fireplace that will work with your home’s flue, regardless of its type. If you spend most of your time in just one room during the winter, you may not need to keep the central heating on all the time if you have one of these models, as they can provide adequate heating on their own during warmer winters. With the state of the economy as it is, this will be a significant help in reducing your utility costs. Below given some of the best gas fires for sale online
Let us consider top 5 gas fires:
- Flues in Precast Construction, Class 2
Homes constructed after 1980 often include what is called a “pre-cast flue,” which is a shallow flue constructed using concrete blocks and installed inside the wall cavity. It is not uncommon for the concrete piers to transition into a steel pipe in the attic and then end through a ridge tile on the roof. When it comes to gas fires, pre-cast flues used to have a fairly restricted selection, but lately manufacturers have released a wide variety of slimline appliances. Traditional outset fireplaces are also an option; these are built to sit on a hearth rather than being built into the wall. - Flues Prefabricated to Class 2 Standards
It’s worth repeating that this style of chimney is typical of homes constructed during the last three decades. The flue of a prefabricated fireplace is a five-inch steel pipe set in a framed wall. While the emissions from gas stoves with pre-fabricated flues are lower, the depth of the wall into which the fire is placed may need a shallower fuel bed. - Flues of the First Class
There are few limitations on the types of gas fireplaces you can install with a Class 1 flue. Common in older homes, a brick chimney is the typical Class 1 flue. Most gas fireplaces can be installed since the depth is sufficient and the flue inside the chimney is sufficiently large. Some fireplaces are built into the wall rather than into the floor; these are called “hole-in-the-wall” fireplaces. Before installing a new gas appliance, it is crucial to inspect the chimney to ensure it is structurally sound. If your chimney has deteriorated over time, have a professional gas installation do a smoke test to make sure the flue is still working properly and has no leaks. - Fuel-burning fireplaces with glass fronts and open designs
Real gas fireplaces with an open flame are the best way to set the mood in any space. Although this style of fireplace is still widely used, it isn’t as energy efficient as a gas fire with a glass front. The primary reason is that a big flue exit is necessary to direct all the harmful gases produced by an open-fronted gas fire upwards and out of the house. About 40–50 percent of the generated heat is lost in this way, up the chimney flue.. - Ventilation Systems for Gas Fires
Most gas fireplaces have a manual Piezo at the base for controlling the flames. It consists of a control knob that is cranked to the ignition setting and then the igniter button is pressed to create a spark and is hidden behind a removable portion of the fret. All modern fireplaces have safety mechanisms that cut off gas flow if the thermo-couple element of the ignition does not detect a flame. As soon as the flame goes out, the gas supply is cut off immediately.
Conclusion
An authorised professional only should install a gas fireplace. If you value your safety and the validity of your manufacturer’s warranty, you must use an authorised installer. Regular maintenance is necessary for all gas fireplaces to ensure that they continue to operate effectively and safely. This is also a prerequisite for any extended warranty on home appliances.
