These ten kitchen faucet upgrades offer great solutions with minimal effort and expense.
- Replace outdated knobs with modern handles: Est $5-$40
- Swap out old, leaky single-outlet faucets for new dual-outlet models: Est $150-$300+
- Add a pop of color to those drab counters: Est $0-$25 (depending on how many tiles you want)
- Give that kitchen sink a makeover: Est $40-$150 (depending on sink type)
- Upgrade that out-of-date cabinet lighting: Est $0-$75
- Install a wet bar or fix that old bench that goes nowhere: Est $30+
- Give your bathroom vanity a facelift: Est $50
- Update the kitchen cabinets to something a little more modern, or add more storage space in the cabinets: Est $100-$300+ each
- Upgrade your kitchen’s layout with an island countertop: Est $100 (with an additional $20 for workstations and seating)
- Add decor to or near your stove? You need to add some flowers, potted plants, or favorite herbs.
You may find your kitchen mundane easily because you look at the same layout and appliances all the time. It is normal because it tends to be tired over time as the hub of a house. Therefore, you need to upgrade it if it begins to look dull and go south.
One of the fixtures you need to upgrade is the kitchen faucet because you tend to use it all the time. Upgrading it will help you refresh your cooking space. Besides, it will boost your mood if it works properly.
Replacing the kitchen faucet may be tricky. Still, it is not impossible. Please check out these 10 kitchen faucet upgrades and DIY project improvements if you look for some ideas. As always, Simphome presents you with the list.
10. How to Replace Kitchen Faucet for Newbie
The best way to upgrade your kitchen faucet, especially if it does not work properly anymore, is by replacing it. You may think that it is a daunting task because it entails working with plumbing.
Replacing an old faucet with a new one is not impossible. You will need to clear the area under the sink to do this. Do not forget to put a bucket near you to catch extra water. You may also need to lay an old towel.
After that, disconnect the water supply. You can use pliers and adjustable wrenches to do it. You are ready to remove your old faucet by loosening the nut that holds it in place.
Now, it is time for you to get the new faucet installed. This process may vary depending on the type of faucet you will use. Consider Pfister Miri kitchen faucet because it allows you to install it easily from above the sink.
- First, drop all the faucet tubes into the hole after lining up the deck plate.
- Now, tighten the faucet by rotating the TopPfit from the top until the faucet is snug against the sink.
- Then, drop the sprayer and connect it.
- Finally, connect the faucet supply lines.
9. Renew the Kitchen Sink
Aside from the faucet, you may also need to consider replacing your kitchen sink for a better look.
First, you need to get a new kitchen sink that has the same size as the old one for easy installation.
Another challenge you have to deal with is removing the old sink. It is even more complicated than installing the new one. Again, the process may vary. Still, here are some common tips you can try.
- You will find wastewater while loosening the slip-joint nuts. Thus, you need to place a bucket under the trap to catch it.
- Then, remove the disposer.
- Separate drain parts that will not yield to large slip-joint pliers with pipe wrenches. You may damage the pipes, but do not worry! You will replace them after all.
- Consider adding them if your hot and cold water supply pipes do not have shutoff valves.
- Slice the caulk around the sink using a utility knife. After that, slip a stiff, putty knife under the sink’s lip. Then, loosen it by gently prying it up.
- Once you have done all the tips mentioned above, you are ready to install the new sink. However, if you are unsure about it, you can ask for some help.
Relevant ideas on how to renew the kitchen sink or transform it differently:
- Start your kitchen sink transformation by replacing the old cabinet hardware. Get some new knobs to boost up the decoration in your kitchen.
- You may also want to get rid of the old sink and install a new one with a spout.
- You may also want to get rid of your kitchen faucet and install a low-flow model that uses less water to save water and energy costs.
- You can also consider replacing old faux marble countertops with natural stone with the same color, pattern, and styles as your current counters, so you have variety in your house’s decorating theme too!
- Update the Kitchen Cabinets with Little More Modern Touches
The next thing you need is to update your old cabinets because they are not as durable as you think. Perhaps, your kitchen cabinets have been staring into you every day for so long that you have forgotten about them! Tall cabinets with glass doors will be perfect as storage for kitchen gadgets separately or in a group. This idea can help you get more organized and keep your areas clean. Besides, the new look will make your kitchen more attractive than before.
8. Double Kitchen Sink to Separate Dishes
If your previous kitchen sink has only one bowl, try the one with double bowls.
A double-bowl kitchen sink offers many benefits. You can use one bowl to soak the dishes and the other to rinse them, making this chore more efficient.
Another great idea with a two-bowl kitchen sink is to use one bowl to prepare the food. What about the other? You can use it to store dirty dishes temporarily until you are ready to wash them. Now, you can rinse your vegetables comfortably.
Despite the benefits above, a double-kitchen sink also entails several drawbacks. The most significant disadvantage is the extra space it may require, which is not a good choice for a small kitchen.
Since there are two bowls in one sink, the space of each bowl is limited. Thus, you may not be able to stack a lot of dishes and large pots.
- Step 1: Put your sink in place. You will need to remove the old sink first. Before you do it, consider disconnecting the water supply line and turning off the water valves, including the hot and cold water shutoffs.
- Step 2. Add plumber’s putty around the opening of your new sink. Press it and make sure that it touches the top of your sink’s lip underneath with a thin bead of caulk. Make sure you push firmly on all sides to get rid of any air bubbles inside!
- Step 3. Put the faucet in place. Note that it comes with an L-shaped spout attachment. Place it between p-rings so that the spout will go straight down at a 90-degree angle. Then, plug the water in and turn on the water valves again.
- Step 4. Next, you will need to install your new base plate under the sink into which you want to install your new sink and faucet. Put a small amount of plumber’s putty under both plates to hold them together securely. Then, tighten all screws by hand.
7. Apron-Front Sink for a Classic Look
Changing the style of your kitchen can be a great idea to get a brand-new look. Thus, you can opt for this apron-front sink that offers a classic look.
This sink provides a timeless charm for any kitchen. Even if your kitchen is not a traditional one, it will still match the sleek design of your cooking space.
- Step 1: You will need to purchase a new sink that fits your prefabricated sink frame. Make sure your new sink is the right fit for the cubicle wall.
- Step 2: Use wood screws to attach your base plate to the drying rack. Then, make sure the bottom of your sink is flush with the floor.
- Step 3: Next, insert the drain tube into its proper place on both sides. Then, rotate your faucet by hand so the spout should point towards you by 90 degrees. Once done, secure it to its base plate with a T-nut and sealant.
- Step 4: Now, clean up your sink. You can use an old toothbrush to scrub out any leftover caulk.
- Step 5: Finally, you can install your new faucet. Just mount the supply lines to the faucet and connect them to the sink, and you are finished!
6. Try Single-Handed Faucet for a Simpler Look
The single-handed, also called single lever faucet, has one handle. You can turn it from left to right when you want to adjust the temperature.
Since you can rotate the handle, you need to keep some space between the mounting hole and the backsplash so that the handle will not hit anything in the background.
A single-lever faucet is relatively affordable and easy to install and navigate. However, you will have to wait for a moment for the temperature to switch. Besides, it may not provide the precise temperature if you do not place the handle properly.
- Step 1: Put your new faucet on the counter first. Then, use a trim level to ensure it is perfectly level from side to side and front to back. Use a small, thin screwdriver if you need to adjust it.
- Step 2: Next, place the faucet handles and then tighten them with a wrench until they are fixed but not hard.
- Step 3: Put the supply lines in place. Secure each one with a clamp and then secure them together with another one to be connected securely but not too tight to restrict water flow.
- Step 4: Here comes the exciting part! Turn on the water supply and test your faucet! You are ready to install the new sink faucet if everything is fine.
Bonus idea: Enjoy a Classy Look with Soap Dispenser
One of the beneficial options you can try when installing a new sink faucet is to place a soap dispenser nearby. This idea will make it easier for you to wash and keep your kitchen tidy. Besides, you can use this as an opportunity to get a classy look!
A soap dispenser makes it easier to keep your hands clean while cooking when they are likely to get messy and greasy. This action saves time and energy because it eliminates the need for frequent dishwashing.
5. Opt for Pull-Out Faucet to Clean Everything Thoroughly
A single lever faucet is practical and straightforward. However, it cannot help you clean the basin thoroughly. Thus, you need to consider installing a pull-out faucet.
As the name suggests, this faucet features a head extending in a straight line or a flexible hose that you can pull in any direction. Its unique design will instantly add an upscale look to your kitchen.
Besides, you can use this faucet to clean the basin and countertop surrounding the sink thoroughly.
Unfortunately, its flexibility will cost you a small fortune. But, again, the sleek look will be worth the money.
4. Update the Backsplash with Peel-and-Stick Tiles
While you are upgrading your faucet, you might also want to refresh the look of your kitchen by installing a new backsplash.
A backsplash is more than just something that protects your wall from splashes. It defines the style of your kitchen.
You can use many materials for your backsplash. One of these is these peel-and-stick faux tiles that you can install without the hassle.
As the name suggests, you only have to peel the back of the tiles and simply stick them to the wall. Say bye-bye to the messy grout!
3. Go for Metal Backsplash
Decorative metal roofing tiles are an excellent option for an economical and beautiful backsplash. You can buy tin tiles inexpensively at Home Depot. They look luxe, but they are affordable and easy to install. Heavy-duty glue is all you need over existing tile, and if necessary, you can even scratch them up to mimic old metal. They are an easy DIY project that even a beginner would be able to accomplish.
- Step 1: Remove one tile of your existing backsplash and remove the grout surrounding it. Then, clean up the surface of the wall with a damp rag.
- Step 2: Place a thin layer of heavy-duty glue around the wall to place your tiles. Make sure you will not put too much glue, or it could seep through between tiles and look messy.
- Step 3: Press each tin tile firmly to adhere to the wall securely. Use a chisel or hard object to push into position if necessary.
Or Give Your Kitchen a New Look with a Ceramic Tile Backsplash
A ceramic tile backsplash is a traditional option that most people don’t see as an opportunity for innovation or creativity. However, if you want to get a truly unique look, you need to consider adding ceramic tile to your kitchen.
Thanks to its durability and elegance, the ceramic tile backsplash has always been stylish. Thanks to its timeless appeal, it is one of the most popular choices for any kitchen renovation project.
2. A Copper Backsplash and Black Faucet
Look at the epic combination of black matte cabinets and mosaic copper backsplash. They will definitely steal anyone’s focus. Copper mosaic tiles will produce an ideal backdrop for your black faucet. For example, the backsplash matches the copper sink immensely in this kitchen.
To acquire the basic materials, you can go to the nearest hardware store and get everything you need. It’s ideal for an innovative remodel because it provides a modern and timeless, cohesive look.
How to install:
- Step 1: First, you will need to measure the length of your cabinet and the width of your sink. Then, create a layout for the mosaic tiles that include measurements based on how thick each tile is. Note that it is recommended to stack two tiles on top of each other to make sure they completely cover the cabinet.
- Step 2: After that, install ceramic mosaic tiles on top of your cabinets as fast as possible to handle them easily before removing them.
- Step 3: Next, you will need to reposition the back wall and tile pieces so that they won’t be crooked or out of place. You can do this easily by simply moving them towards the sink or cabinet.
If they are still not in the right place, see how to re-install a backsplash.
You can also use glass tiles or metal tiles for the backsplash as an alternative idea. You just need to pick what is appropriate for your kitchen based on a single color.
- Step 1: Measure your cabinet’s length, width, and height. Then, draw a diagram with the measurement on a piece of paper to develop several ideas.
- Step 2: After that, get a few pieces of glass or metal mosaic tiles and create a layout. Make sure you consider the thickness of each tile and its size.
- Step 3: Once you are satisfied with your layout, take everything to the hardware store so that they can cut the tile for you. In addition, you might also want to consider getting professional help if it is too difficult for you to install them on your own.
Lastly 1. A Multipurpose Kitchen Transformation Sink
The combination of a spacious sink and pull-out faucets is perfect to create a safe haven for any cook. This sink features several levels that allow different functions. You can have strainers, cutting boards, and meat racks at the same spot without compromising functionality.
- Step 1: The first thing you need to do is determine the size of your sink based on the size of your kitchen. Then, you can use that measurement to create a layout.
- Step 2: Once you have an idea of what exactly you would like to have, get your hands on some butcher block top, cutting boards, and metal utensil racks so that you can install them permanently. If not, the sink will just be a decorative object only, and it will cost more than it’s worth.
- Step 3: Before installing anything, make sure everything is clean and clear. Sweep off any debris in the cabinet to make everything easier for you to handle.
- Step 4: Install the butcher block top and cutting boards on your sink. Ensure that it is securely in place.
- Step 5: Add the metal utensil racks to the side of your sink until it is done.
Other kitchen improvement ideas you can take to transform your kitchen interior such as:
- No 1. A Greenery Scenery for Kitchen
A kitchen with a great environment like the one below will give you peace of mind. This suggestion is a good idea if you have kids because they can learn from playing with the greenery and doing chores.
- No 2. A Mix of New Hardware Inventory
The kitchen is where most of the cooking occurs in most homes. It is not only where food is prepared but also where things are cleaned and stored. You can update your hardware inventory to match your home interior and make it easier to clean/store utensils and cookware.
- No 3. An Easy-to-Clean Kitchen Floor
It is rather easy to maintain and clean kitchen floors as you do not need to use harsh chemicals or tools. You can go on oiling your tile floors once a month, and you don’t always need to pour a bucket of bleach.
- No 4. A Lower Cabinet for Food Storage
You just have to think about making the most of your storage space in the kitchen area by putting away food and utensils into a lower cabinet with the same height and width. You can also use these open cabinets to store fabric and craft essentials or even take out food from the refrigerator when needed.
- No 5. A Multipurpose Wall Storage
Multipurpose wall storage has been gaining popularity because it contains a lot of storage space for kitchen utensils. You can install a cabinet in the corner of your kitchen and use it as a garden to hang or store your pots or pans.
- No 6. A Mix of Old and New Brick Shelving
It is amazing how adding some brick shelves in the corner of your kitchen can give it much-needed charm and character. In addition, you can paint them in different shades to match your home interior color scheme or even hang on them some lovely rugs for extra comfort.
- No 7. A Lower Counter for Food Storage
It is good to have a lower counter in your kitchen for food storage, and it is also good to have a lower cabinet to save up on space. You can install the counter and the lower cabinet together or even build your own from scratch.
- No 8. A Simple White Countertop
You don’t need to install a complicated granite countertop in your kitchen. You can just go on with a simple white one, and the old-fashioned appearance will be sure to give you that charming rustic charm so necessary for your home.
- No 9. A Wood Cabinet for Food Storage and Other Useless Items.
Wood cabinets are a great way to give all the wooden dishes, utensils, and other useless items their own space. The idea will save you some extra time and space in your kitchen as these are easy to repaint or refinish whenever you want.
- No 10. A Wooden Kitchen Table With Seats
A wooden kitchen table with seating is a chic way to use space in your kitchen. These tables are not just great for cooking, but you can also use them during family dinners or potlucks.
- No 11. A Big and Wide Closet
You can use the space in your kitchen closet to store all of your kids’ toys, clothes, shoes, bags, and everything you will have on hand during the day. This way, you will never have to worry about these items no matter where you are since it is all under one roof.
Kitchen remodeling does not always have to be expensive or time-consuming. These kitchen innovations are easy solutions for people who want a beautiful kitchen without spending much time or money on renovations.
In the end, It may require certain skills to replace your faucet. Thus, you may need some help. Before beginning to do it, please consider these 10 kitchen faucet upgrades and DIY project improvements to decide how you want your cooking space to look.