Download Article Download Article

Tension rods are a convenient way to divide space or hang light curtains. They're fairly easy to install and remove since you don't need any additional hardware to use them. With a little bit of creativity, however, you can use them for other purposes too, such as hanging paper towel rolls, organizing your baking sheets, or creating pet barriers!


Method 1
Method 1 of 4:

Installing a Tension Rod

Download Article
  1. A tension rod needs to be placed in between 2 hard, flat surfaces that face opposite one another, such as the space between 2 closet walls, 2 cabinets, or in a window frame. Use a measuring tape to measure the distance between these 2 surfaces so that you know what length to get.
    • Even though tension rods are adjustable, they can only expand so much. Be sure to take measurements before purchasing a rod.
    • Be sure the surface can handle the pressure of the rod. If you use tension rods, it exerts force on a surface. That is likely fine for a concrete wall, but maybe not for a painted piece of drywall.
  2. Tension rods lose their strength as you expand them. If you were to expand a tension rod to its full length, it won’t be able to hold up very much weight at all. As such, you should buy a rod that's longer than what you need when fully expanded.[1]
    • For example, if you need to fill a 5 ft (1.5 m) space, get a rod that can expand up to 7 feet (2.1 m).
    • Check the weight capacity of your tension rod as well. If you will be hanging heavy items from it, you will need something with a larger weight capacity.
    Advertisement
  3. If your window is very wide, adding 2 curtain panels might be more convenient. In either case, make sure that the entire curtain is on the rod and that the ends are exposed; you don’t want to trap the ends of the curtain when installing the rod.
    • Alternatively, slide curtain rings onto the rod; you can use the clips that are attached to the rings to hang your curtain later.
    • You don't need to do this step if you won't be adding curtains.
  4. If you take a look at your rod, you'll notice that it is actually made up of 2 rods that are set into one another. Grab hold of the rod to either side of the center seam. Twist the thinner rod clockwise or counterclockwise to unlock it; the direction may vary from brand to brand.
    • Hold onto both ends firmly after you unlock it. Don't let the rod expand wider than the space you need to fill.
    • If you put a curtain on your rod, scrunch the curtain towards the middle so that you have something to grab on to.
  5. If you need to, push both ends of the rod towards the middle. Slide it into the space between your 2 walls, then loosen your hold on the rod so that it can expand.[2]
    • The spring inside the rod will push the ends away from each other. This tension will cause the rod to become wedged between the 2 walls.
    • If you added curtain rings earlier, now is the time to clip the top of the curtain to the hooks that are attached to the rings.
  6. Hold 1 end of the tension rod and pull it down first; this should be enough to loosen it so that you can pull it out.[3] If it doesn't, press both ends of the rod towards the middle to compress it, then pull it down.
    • If the rod is still stuck, ask someone to compress it for you while you pull down on it.
    • To store the rod, compress it all the way, then twist the narrower rod counterclockwise or clockwise to lock it.
  7. Advertisement
Method 2
Method 2 of 4:

Organizing in Your Kitchen

Download Article
  1. Open the cabinet beneath your kitchen sink. Place a tension rod horizontally inside the cabinet, then hang your cleaning detergents from it.
    • This only works for cleaning detergents that come in a spray bottle. The trigger will act like a hook.
    • Hang the rod high enough so that you have room under the spray bottles for other items.
    • Maximize your storage by adding a small pail, basket, or caddy. Place items like sponges or scrubbies inside.
  2. Stand 2 tension rods vertically between 2 shelves. The first rod should be 1 to 2 inches (2.5 to 5.1 cm) from the edge of the self. The second rod should be 1 to 2 inches (2.5 to 5.1 cm) from the back of the shelf. Repeat this process to create more slots, then slide cutting boards and baking sheets between the slots.
    • How far apart you keep the tension rod pairs is up to you. You need them to be far enough to fit a cutting board or baking sheet. About 3 to 4 inches (7.6 to 10.2 cm) should be plenty.
  3. Open up a kitchen drawer that is deep enough to store your lids. Insert a few tension rods, about 3 to 4 inches (7.6 to 10.2 cm) apart to create slots. Slide your desired lids vertically into the slots, like files into a filing cabinet.[4]
    • You can insert the rods across the width of the drawer or down its length. It's up to you.
    • How far down the drawer you place the rods is up to you. About 1/3 to 1/2 way down is ideal.
    • Use the front half of the drawer to store the lids, and the back half to store the matching pots, pans, or Tupperware containers.
    • You can use this technique to store other items too, like rolls of aluminum foil or plastic wrap.
  4. Open up your cabinet and arrange your spice jars in a row along the back. Insert a tension rod just above jars, then stand more spice jars on top of it.[5]
    • If the spice jars won't stand up on the tension rod, move the rod forward by about 14 to 12 inch (0.64 to 1.27 cm) to create a small gap. The jars will tilt back into this gap.
    • You can create more "shelves" by adding more rows of tension rods.
  5. Slide a roll of paper towels onto the rod first, then place the rod horizontally under a cabinet. Expand the rod until each end is braced firmly against the adjacent walls. You can also use this to store kitchen towels above a sink.[6]
    • Make sure that you hang it low enough so that you can unravel the paper towels without them scrapping against the bottom of the cabinet.
    • If you are using this as a hand towel rod, you can hang other items from the rod too, like spray bottles and scrubbies.
  6. Advertisement
Method 3
Method 3 of 4:

Organizing Other Rooms

Download Article
  1. Slide a roll of wrapping paper onto the rod, then place the rod between 2 shelves or walls. Repeat the process with rolls of ribbon, then place it below or above the wrapping paper.[7]
    • Stagger the rods. The lower rod should be closer to you, while the upper rod should be further back and closer to the wall.
    • Maximize your craft storage by hanging baskets from the rods. Place items like scissors or tape into these baskets.
  2. You will need 2 rods for each row of shoes. Place 1 rod towards the back of the closet, about 1 to 2 inches (2.5 to 5.1 cm) from the wall. Place the second rod about 1 to 2 inches (2.5 to 5.1 cm) below it, and towards the front of the closet. Set your shoes on top of the rods, with the toes pointing forward.[8]
    • The exact distance between the rods depends on the length of your shoes. The smaller your shoes are, the closer together the rods should be.
    • If your shoes have heels, you can create a steeper angle between the 2 rods, because the heels will hold onto the first rod.
  3. Add some S-shaped shower hooks onto a tension rod, then place the rod into your closet. Use the hooks to hang things like scarves, bags, or necklaces.[9]
    • If you are using scarves, you can hang them directly onto the rod without hooks. Keep them in place with slipknots.
    • A slipknot is where you fold a scarf in half, tuck the folded end behind a rod to make a loop, then pull the tails through the loop to tighten the knot.
  4. Place a shelving unit into the middle of your closet, right against the back wall. Place a tension rod to the left of the shelf, near the top, and a second rod towards the middle. Repeat this with another set of rods to the right of the shelf.[10]
    • Use the shelf to store folded garments, like jeans and T-shirts. Use the rods to hang nicer garments, like blazers and dress shirts.
    • How much space you leave between the tension rods depends on the length of your clothes. Hang them high enough so that the hems of your clothes don't bunch up.
    • The width of the shelving unit is up to you, but something that's about one-third the width of your closet would be ideal.
  5. Place this tension rod against the wall, so that it is opposite to the shower curtain. Add S-shaped shower hooks to the rod, then hang your loofahs, scrubbies, and other items from the hooks.[11]
    • Hang a mesh shoe pocket organizer from 2 hooks, then fill the pouches with shampoo and conditioner bottles.
    • The shoe organizer must be made from mesh, otherwise it will collect water and develop mildew.
  6. Advertisement
Method 4
Method 4 of 4:

Finding Other Uses for Tension Rods

Download Article
  1. Measure the height and width of the space you want to cover, such as under a bed or desk. Sew a curtain panel according to these measurements, then slide it onto a tension rod. Insert the tension rod under the bed or desk legs, then adjust the curtain to your liking.[12]
    • Instead of sewing 1 long panel, sew 2 to 3 narrower panels. This will make it easier to access the things you need.
    • This works great for bunk beds, shelves, and entertainment cabinets. You can even use it in place of closet doors.
    • If you have a cat, place the litter box under a table, then cover the sides of the table with your makeshift curtains.
  2. Slide small metal pails onto a tension rod, then place the rod into a sunny window. Place potted herbs into the pails for an instant, mini herb garden!
    • Don't plant the herbs directly into the pails as they don't have good drainage. Put them into smaller plastic pots first, or leave them in the pots that they came in.
  3. Place 2 tension rods inside a deep drawer, 1 on each side. Get some hanging file folders meant for a filing cabinet, and place them inside the drawer; the hooks will sit right on the rods.[13]
    • Place the rods down the length of the drawer on the left and right sides. Don't place them towards the front and back.
    • The rods need to be high enough so that they can hold up the folders. About 10 inches (25 cm) from the bottom should be enough.
    • Thin, slender rods will work the best for this. Don't use thicker ones, or they will create too much bulk.
  4. Decide on the height of your pet barrier, then sew a curtain panel that has a pocket on both the top and bottom edges. Slide a tension rod through each pocket, then insert it into your doorway. If you need to, use thumbtacks to secure the sides of the curtain to your doorframe.[14]
    • The bottom edge of the curtain must have a pocket and be attached to the bottom rod, otherwise your pet will just crawl under it.
    • Use 1 panel for this, not 2, otherwise your pet will find a way to crawl between the panels.
    • The barrier needs to be tall enough so that your pet can't climb over it, but low enough so that you can step over it.
  5. Simply close all of your drawers, and slide your tension rod vertically down through all of the handles. Keep in mind that this only works with drawers that have C-shaped handles, and not with knobs.[15]
    • This is best for drawers that you don't use regularly, as you will need to remove the tension rod each time that you want to open them.
    • This is also a great solution for nosey pets who have learned how to open drawers.
  6. Advertisement

Expert Q&A

Search
Add New Question
  • Question
    How do you tighten tension curtain rods?
    Emma Oberlander
    Emma Oberlander
    Interior Designer
    Emma Oberlander is an Interior Designer and the Owner of Otis Street Design in Boston, Massachusetts. She specializes in residential remodels, boutique hospitality design, project management, and budget design. Emma holds a BA in Communication and Media Studies from Northeastern University and an MA in Interior Architecture from The New England School of Art and Design. She has a combined ten years of project management experience in the design, marketing, and non-profit industries, both nationally and internationally.
    Emma Oberlander
    Interior Designer
    Expert Answer
    If you have a loose tension rod, you probably have to go up in size. For example, if your space is just 60 in (152.4 cm), it might be worth spending the extra money and upgrading to a 70 in (177.8 cm) rod.
  • Question
    My new "Inter Design adjustable tension rod " is locked in place and will not twist at all to shorten. How do I unlock this feature? It's 24-42" and I expanded it to put on the shower curtain.
    Gabriel
    Gabriel
    Community Answer
    You will need to twist the rod and the fittings on the ends to the opposite direction either clockwise or counterclockwise. You must use two wrenches or pliers to do this when it is locked tight in place. Use one to tightly grip the rod on one side and hold it firmly while you pull the other towards you and twist the adjusting screws. Avoid pushing away from you because you could injure your knuckles if you lose grip or the jammed rod suddenly breaks free or loosens. Note that some tension rods are spring loaded and must be pushed in to compress.
  • Question
    Can I use blackout curtains?
    Community Answer
    Community Answer
    It depends on the strength/tension of the rod. If the curtains are too heavy, they could slide, with the rod, to the floor.
See more answers
Ask a Question
200 characters left
Include your email address to get a message when this question is answered.
Submit
Advertisement

Tips

  • If you're worried about a rod slipping, screw plastic bottle caps onto the walls first, then set the rod into them. They will act as cups or brackets to hold the rod up.[16]
  • If you need to, use a stepladder or a stepstool to reach the area you want to add the tension rod.
  • Tension rods come in all sorts of colors and finishes. Choose the one that matches your room.
Show More Tips
Submit a Tip
All tip submissions are carefully reviewed before being published
Thanks for submitting a tip for review!
Advertisement

Warnings

Advertisement

Things You'll Need

  • Tension rod
  • Stepladder (optional)
  • Curtain (optional)
  • Curtain hooks/rings (optional)

About This Article

Emma Oberlander
Co-authored by:
Interior Designer
This article was co-authored by Emma Oberlander. Emma Oberlander is an Interior Designer and the Owner of Otis Street Design in Boston, Massachusetts. She specializes in residential remodels, boutique hospitality design, project management, and budget design. Emma holds a BA in Communication and Media Studies from Northeastern University and an MA in Interior Architecture from The New England School of Art and Design. She has a combined ten years of project management experience in the design, marketing, and non-profit industries, both nationally and internationally. This article has been viewed 171,188 times.
How helpful is this?
Co-authors: 13
Updated: February 20, 2024
Views: 171,188
Categories: Featured Articles
Article SummaryX

To use a tension rod, start by measuring the distance between the 2 walls or surfaces, then purchase a rod that's longer than your measurement. Next, twist both ends of the tension rod to unlock it and hold onto the ends firmly. Slide the tension rod between the 2 walls, loosen your hold so it can expand, and the spring inside will cause the rod to become wedged tightly between the 2 walls. For tips on using tension rods creatively, read on!

Did this summary help you?

Thanks to all authors for creating a page that has been read 171,188 times.

Reader Success Stories

  • L. Nickerson

    L. Nickerson

    Feb 7, 2020

    "I'm currently trying to find hardware solutions for 10 windows in our sun room. This is very helpful..." more
Share your story

Did this article help you?

Advertisement