DIY Copper Laptop Table

DIY | February 11, 2014

Today we have another amazing tutorial from my contributor, Brittany! She is constantly coming up with great projects on her blog, brittanyMakes. I LOVE her latest DIY project as a new take on a sidetable!
* * * * * * * * * * * * * * * * * * * * * * * * * * * *

 
Today I’m sharing a tutorial that might look a bit difficult, but is actually one of the easiest projects I’ve done: a copper pipe laptop table!

 

DIY Copper Laptop Table | brittanyMakes 

 Copper is trending hard right now, and I swear you can whip up this table in under an hour and impress your husbands, your friends, even your husbands friends! Not to mention you could make yourself one amazingly utilitarian & chic portable work station.

Let’s get to making this thing, here’s what you need:

DIY Copper Laptop Table | brittanyMakes
I mimicked the dimensions off of this table, which measure 18″ W x 14″ D x 26″ H. This means you’ll need to cut:
  • 4 x 14″ pieces of pipe
  • 2 x 18″ pieces of pipe
  • 2 x 26″ pieces of pipe
STEP 1 – measure and cut your pipe

DIY Copper Laptop Table | brittanyMakes 

 Pipe cutters are so amazing, you literally can cut a clean piece of pipe in two minutes! All you do is twist, tighten, twist, tighten, and twist.
 

DIY Copper Laptop Table | brittanyMakes 

 STEP 2 – Using some heavy duty glue, place a few liberal dabs inside the elbow fittings, and begin assembling the top and bottom bases. I let these sit for about 15-20 minutes to let the glue set. It actually takes about a full day for the glue to cure, so you don’t want to actually use the table until the glue is completely set.

While the two bases are sitting, go ahead and stain your wood. I just brushed on two quick and light layers. I chose a dark walnut stain, but this table would look great with literally any shade of wood stain.

 

DIY Copper Laptop Table | brittanyMakes 

 STEP 3 – Apply more glue to the elbow brackets and attach the legs to the top and bottom bases. To help these pieces set, I sandwiched the table between two heavy objects I found lying around in our garage.
 

DIY Copper Laptop Table | brittanyMakes 

 After your wood is dry to the touch, dab some glue on top of the corner elbows at the “top” base, and clamp your wood in place.

A trick I learned to clean the red die from copper pipe is to rub the pipe down with high acetone nail polish remover. It literally wipes off in seconds! Make sure it’s high acetone, I started using a medium acetone (pictured below) and it was much more laborious than it needed to be.

Another trick to polish the copper is to rub it down in (wait for it….) KETCHUP! Seriously, I didn’t photograph this step but you can make your copper bright and shiny with a good ol’ bottle of household ketchup. Kinda makes you wonder what’s in it…

DIY Copper Laptop Table | brittanyMakes
The only difficult part of this project is patience in letting the glue cure. Otherwise, the assembly is a cinch and the outcome is a stunner!
 

DIY Copper Laptop Table | brittanyMakesDIY Copper Laptop Table | brittanyMakes

 

DIY Copper Laptop Table | brittanyMakes 

 Now go on, craft yourself a laptop table. You’ll get oohs and aahs all over the place, I promise.

 

Learn about all of my great contributors on my Meet The Team Page
* * * * * * * * * * * * * * * * * * * * * * * * * * * *

Hi! I’m Brittany from the blog brittanyMakes,
where I journal my adventures in DIY projects ranging from everyday
home decor to handmade jewelry, from tips in photography to stories of
bulldogs, and everything else in-between.   I am a fierce accountant by
day and a zealous DIYer by night.  I spend my time balancing my love for
home decor and design with the everyday responsibilities of my
corporate day job.  My main mission is to inspire my readers to do what
they love, take risks, and above all, to exercise their creative
muscles!