Simpson
An Easily Adjustable Shelf Project Idea
This quirky design of wall shelves has a clamping system for the racks so that you can adjust them according to your need. There will be three 120x70cm wall shelves with five clamping systems each, so you’ll need ten 70×3.7cm wooden slats for one unit.
Make the fifteen shelves vary for 3×50, 35, 20, and 15cm. After cutting and sanding all the pieces, paint the plywood plates and wooden slats white. Pre-drill holes in the wooden slats by marking 5 cm on each side and divide the space in between into four equal 15cm parts, then screw them on the plywood plates. Now, fix the three shelves to the wall and decorate happily.
