Cabinet in a kitchen is a must have. It will spruce up the kitchen as the kitchen appliances and equipment are organized well. However, it doesn’t have to cost you an arm and a leg because with these 10 DIY Cheap Kitchen Cabinet Projects you’ll get the cabinet you need with the style you wish.
Same as last title I published, this list is compiled for you by Simphome.com
And to complete your learning experience, I present you next super relevant video:
10. A Wooden Pallet Cabinet idea
For the instruction, First, take the wooden pallet apart and make sure all the nails have been removed. After that, you may need to smoothen them using a sandpaper. Once they are sanded, measure then cut them into the size you want, then join them together with screws until you get the shape you want. The last, assemble the door with hinge. You can also stain the cabinet to give it a fresh look.
Also read: 10 DIY Coffee Table Ideas on a Budget
10 Storage Solution and Upcycling Ideas for Cheap
9. A Farmhouse Style Kitchen Cabinet idea
To get this look, you’ll need to remove your cabinet doors, get some wood boards, paint and nail gun. Join the boards together with nail gun until it forms the size of the top side and the doors of cabinet. For the doors, add a piece of wood at the bottom, middle, and top to form the traditional Z shape pattern. Install the wrought-iron hardware for a more rustic look and time to learn next idea of this list.
Recommended: 10 DIY Ways of How to Organize your Kitchen Cabinets
10 DIY Modern Kitchen Cabinet Ideas and Storage
8. A Shaker Kitchen Cabinet idea
First, start with taking off all the doors from your cabinets. Clean them up with sand paper or with a very strong cleaner then wipe them, and make sure there’s no dust left on it. Next cut the plywood 2.5” width or as you wish then cut them to form a frame for the face of the door.
Sand each edge of the pieces, then nail them onto the door. Sand them once again to get smooth surface and edges, clean the doors and get them painted. Last, install them back onto your cabinets.
Related ideas: 10 Cheap Cabinet Makeover Ideas for Limited Kitchen
10 Brilliant DIY Kitchen Cabinet Ideas
10 DIY Kitchen Cabinets Refacing Ideas
7. A Kitchen Cabinet with Plate Rack idea
Cut round dowels about 2.5” longer than the diameter of the plates and make holes in the square dowels where the round dowels will be inserted.
Attach the round dowels in the holes with glue. Let the glue dry then continue making ½” deep holes in each corner of the rack pack. Cut four round dowels in the width of your cabinet, and get them into holes to join each rack pack. Finally, install it in your cabinet.
Relevant ideas: 10 Creative but Cheap Custom Cabinet Ideas
10 Cheap DIY Kitchen Cabinet Ideas
6. A Glass Cabinet Door idea
First, measure the door to make a frame for the glass then drill each corner so you can start sawing it. After getting the perfect frame, it’s time to cut the glass ½ – ¾ inch wider and taller than the measurements, then place it over the frame. Next, add fasteners to make the glass stay in place.
Other also read: 10 Storage Solution and Upcycling Ideas for Cheap
10 Clever Storage for a Small Kitchen ideas
5. A Cheap Plywood Kitchen Cabinet idea
To make this plywood cabinet, trim a full piece of plywood at the size you’ve decided before. However, first, make sure two pieces of is longer so you can craft toe kicks which can raise when you need them.
You’ll also need three thin strips of plywood for each top cabinet.
Next, apply edge banding then drill pocket holes for screws. Next, start assembling each strip. The two longer pieces will be the left and right side of the cabinets. Attach the bottom strip few inches from the bottom to get the toe kicks first. Next, attach the thin strips to the back top and front top.
Add the back of cabinet which can be shorter or as long as the two sides. Last, make a door for your cabinet then attach it with hinges.
More ideas: 10 Clever Kitchen Shelving Ideas for Living the Kitchen Up
10 Storage Tricks for a Small Kitchen
4. A Two-Tier Drawer Spice Rack idea
First, cut the backside of the drawer more than half, then install the tray slides on each side inside the drawer. Next, make a tray which has the same length as the drawer, but this time, make it a bit narrower. You can also add partitions as you need. Finally, attach the other piece of the tray slides on the tray. Insert the tray in the drawer then put the drawer back into the cabinet.
Super recommended lists: 333 Small Kitchen Ideas, Organization, and Kitchen Designs
45 Kitchen Remodel Ideas for People with Low-Budget Condition
10 Cheap DIY Kitchen Island Ideas for Low Budget People
3. A Pull-Out Garbage Can in a Cabinet idea
First, choose a single door cabinet to put the garbage cans in, then take the door off and remove all the hardware. Next, attach the slides on both left and right side inside the cabinet. Add a wood frame so the trash cans can fit perfectly and attach the door outside the frame with screws.
2. A Corner Kitchen Cabinet idea
The corner of a kitchen is often left unused. In fact, it can be a potential storage space. If you can’t find the proper cabinet that can fill in this awkward corner, try making a corner cabinet yourself.
First, cut each corner with 45 degrees bevel edge. You need at least two pieces of plywood for the top and the bottom and you may add some for its shelves. Once you get those cuts, measure the bevel edges to make the sides then attach them to the top and bottom with glue and nail gun then add the back. Last, make the face frame then attach a door.
More kitchen optimization ideas : 10 Smart ways How to Organize Kitchen Drawers
10 DIY Storage Ideas for Limited Kitchen and Dining Room
10 Cheap and Easy Small Kitchen Makeovers
Lastly number 1. A DIY appliance garage idea
If you don’t like to see small kitchen appliances cluttering your countertop, consider building a cabinet for your appliances. It doesn’t require too many materials, only some boards, wall panels, nails and hinges.
First thing you need to do is measuring the space where cabinet will be built. Once you’ve done, cut the boards to sizes and join them together with screws, forming two frames. Nail the wall panels on each frame covering the holes. They will be the right and left walls of the cabinet. Next, add crosspieces to the back and to the top then nail the face frame. Last, attach a door with hinges then paint the cabinet. Let it dry and install it to the place you wanted.
Your mission completed,
So, those are 10 DIY Cheap Kitchen Cabinet Projects that will not only save your money but also provide you more storage, so have you decided which project you will give a go first?
10. Wooden Pallet Cabinet | Natural Building Blog
9. Farmhouse Style Kitchen Cabinets | Mountain Modern Life
8. Shaker Kitchen Cabinets | Cherished Bliss
7. Kitchen Cabinets with Plate Rack | Remodel and Olacasa
6. Glass Cabinet Doors | Provident Home Design
5. Cheap Plywood Kitchen Cabinets | Wood Shop Diaries
4. Two-Tier Drawer Spice Rack | Family HandyMan
3. Pull-Out Garbage Can in a Cabinet | Honey Bear Lane
2. Corner Kitchen Cabinets | Ana White
1. Additional Kitchen Cabinet for Appliances | Build Basic
Subscribe and Enjoy Our Newsletter